First, the customer name:

Beijing Benz-Daimler Chrysler Automobile Co., Ltd.

Second, the project profile:

1. Scope of supply: engineering design, manufacturing, installation and commissioning of welding and assembly conveyor systems.

2, project introduction

This project integrates equipment in the existing Chrysler automobile assembly shop in Beijing Benz, producing Mercedes-Benz E-Class and C-Class. A new ASD conveyor line is installed at the ground level. Use a roller raft lift to lower the body to the ground level. The air slide is fed into the roller bed and, at 0 m, is transported by a chain conveyor to the new ASD conveyor line on the north side. The body is then fed into a +3.3 m C-type spreader by means of a travel machine, a roller bed and a lift. The body is on the final assembly slide. After the operation is completed, the body enters the traverse protection station (speed 12min/min) to the left or right. In order to adapt to the automatic conversion of the two models. The fulcrum automatic conversion device is installed online and converted according to different models. On the chassis spreader and the skid body, the body is turned to the work station, and the lifting platform and the floating device are arranged, and the positioning device is accurately positioned to ensure the accuracy of the hanging. In order to adapt to the new model, the door line has been retrofitted to all support and installation structures to ensure that the door line adapts to the needs of the new model.